Thanks for the tutorial. I was not using either the accordion or ladder approach. Instead I was flattening the final billet and disappointed that I wa...

Ordered mine last night. Thanks Jason.

Well I did a schedule run this time without the knives in it to see if the new Tap controller would make it through the schedule without fail. It did....

Thanks Joshua for the info from Latrobe. I will check the hardness and see if I will need to anneal it first. What a pain this whole experience has be...

Jesse I have at least one of the longer fillet knives that is visually bowed within the pouch. This one may turn out to be a good experiment to see wh...

Thanks Karl. I am using the high temp foil so I hope I can salvage them. Scott

What about stabilized natural wood? There are a ton on good looking stabilized wood blocks and scales on the market.

Ivan, Some pretty cool designs. Thanks for sharing. Scott

Thanks Kevin for starting this thread. I raised the same issue last year about getting small groups together. I learn by watching and seeing wha...

[quote name='Kevin R. Cashen' date='05 January 2020 - 08:05 AM' timestamp='1578236702' post='25814'] I've had issues with carbide on nonferrous, sof...

[quote name='Matthew Parkinson' date='03 January 2020 - 07:17 PM' timestamp='1578104232' post='25801'] For brass bronze or copper I mostly use 2 flu...

[quote name='Karl B. Andersen' date='03 January 2020 - 02:56 PM' timestamp='1578088616' post='25799'] What is it you are trying to shape? Ka...