Mike Williams
Mike Williams
Member
Joined: Feb 23, 2010
Topics: 21 / Replies: 242
Reply
Preventing Scuffs While Sanding

I use either spray on rubber like paint or duct tape; or both

4 years ago
Topic
Reply
Weld Seam Problem

This is not what I do either. I would look closely at the graphite. It comes in many, many mixes. Lead and copper are common additives to graphi...

4 years ago
Reply
Apprentice Pictures

Good work! I would highly recommend that you find the nearest hammer-in; take your knives. There you will be able to discuss with several ex...

5 years ago
Reply
Target Hardness

My suggestion would be to test the knives in their usage range. Hardness is only part of the equation. If your knife performs as you wish/expec...

5 years ago
Reply
Coffee Etch

I have used coffee at times for the last three or four years. I find that it does not etch to any significant degree. But it does color. If I want an ...

5 years ago
Reply
Js Presentation Blades

On ABS main page; testing guidelines and rule changes.

5 years ago
Reply
Journeyman's Test Question.

All js test knives must have a guard or a bolster.

5 years ago
Reply
2019 Spring The Piney Woods

I would like to thank all of the hardy souls who were with us on this last hammer-in at Old Washington. The weather was far from perfect but everythin...

5 years ago
Reply
5160 Grain Structure Question

your grain structure is very coarse. Research "normalizing procedures". Will get you taken care of.

5 years ago
Reply
2019 Spring The Piney Woods

Looks like we are going to have some nice weather for the Hammer-In this weekend. As usual; Brion and I will gather up all the usual rejects, ner d...

5 years ago
Reply
Cork Belt Vs 400 Grit Belt

Diamond white,green chrome then pink scratchless.

5 years ago
Reply
Handle Thickness

Ripping to 3/8 thick will give you room to round things nicely. On a piece that thick I would rip the center; then pick the side I like best and rip t...

5 years ago
Page 1 / 18