Zack, My Say-Mak is the 50Kg model (110lb). I purchased it simply because it was what Tom had in stock at the time. I actually wanted the 135...

Something that bears mentioning about Acraglass is....it is NOT mixed as typical epoxy is mixed. Acraglass is mixed 4 parts resin, to 1 part hardene...

Prior to purchasing my Say-Mak, I took the time and effort to get around and "try out" as many of the air hammers as I could. I worked on an Anyang f...

Hi Folks! I can address the issue of why I will not use anything other than acraglass, and why I simply don't not like any of the fast set ...

Hi Zack! First off, I'm gona scold you a bit: I have zero background in fabrication BALONEY!! You've been making knives for 4...

I've been running a KMG since shortly after they came out. I personally think there is not a better cost to quality grinder on the market. The area ...

As Lin mentioned, this is going to be one of those areas that vary widely from maker to maker. The bottom line is to do what works best for YOU. I ...

Having gone through both the JS and MS testing process, as well as judging at both levels since 2001, the very first thing I can offer is that until a...

I just got home a couple of hours ago from the show, and as one of the Judges, would like to add my congratulations to all of our new ABS Journeyman S...

so there are a bunch of used equipment that isn't being used? Yep! It's all those machines that folks purchased to "get by", then found tha...

I know where you're coming from about taking time to save.....I had to do the same thing. It took me 3 years to save for my first "top end" grinder. ...

I've been down the road of trying to "make due" because of funds, space, etc. From experience, I can tell you this....if you have to, save your mone...

First thing to consider....do you have the power available that the hammer requires? Don't laugh...I had a friend who purchased a Bradley, got it hom...

Hi Mike! Welcome to the forums. Little Giant Hammers are becoming harder and harder to find....especially ones that are in good enough sh...